HRESULT 0x803100C8 (FVE_E_DE_PROTECTION

Status / error code:

Category:

Constant name:

Source:

Facility:

Operating System:

Description:

Protection is enabled on the volume but has been suspended. This is likely to have happened due to an update being applied to your system. Please try again after a reboot.

Previous	Next
FVE_E_DE_WINRE_NOT_CONFIGURED	FVE_E_DE_OS_VOLUME_NOT_PROTECTED

FVE_E_DE_PROTECTION_SUSPENDED

Why this is not a generic disk error

The practical meaning of FVE_E_DE_PROTECTION_SUSPENDED is that Device Encryption is configured but key protectors are temporarily disabled, often for a servicing or firmware transition. The HRESULT is 0x803100C8.

Three decisions before remediation

Is the FVE_E_DE_PROTECTION_SUSPENDED target correct?: For FVE_E_DE_PROTECTION_SUSPENDED, use the volume or protector GUID and confirm its role; do not rely only on a drive letter or friendly name.
Is the FVE_E_DE_PROTECTION_SUSPENDED request allowed?: For FVE_E_DE_PROTECTION_SUSPENDED, resolve effective policy, Windows edition, caller token and management source for the automatic Device Encryption operation.
Is the FVE_E_DE_PROTECTION_SUSPENDED state stable?: For FVE_E_DE_PROTECTION_SUSPENDED, record conversion, protection, lock and reboot status before modifying anything.

For FVE_E_DE_PROTECTION_SUSPENDED, note: Automatic Device Encryption is a provisioning and compliance workflow layered on BitLocker. When diagnosing FVE_E_DE_PROTECTION_SUSPENDED, remember: It evaluates platform eligibility, account-backed recovery escrow, all applicable fixed volumes and protection state; failure of Auto-DE does not automatically mean manual BitLocker is unavailable. For FVE_E_DE_PROTECTION_SUSPENDED, note: Automatic Device Encryption has stricter end-to-end prerequisites than manual BitLocker. When diagnosing FVE_E_DE_PROTECTION_SUSPENDED, remember: An Auto-DE HRESULT should be reported with the device-encryption support reason and account/escrow state.

Why a common workaround is wrong

This should not be diagnosed as a decrypted or never-provisioned volume; encrypted sectors can remain intact while protection is suspended. For FVE_E_DE_PROTECTION_SUSPENDED, that nearby condition needs a different corrective action and may produce a similar user-facing message.

Confirm the returning layer

For FVE_E_DE_PROTECTION_SUSPENDED, record GetProtectionStatus, reboot count for suspension, servicing history, protector list, conversion state and pending reboot state. For FVE_E_DE_PROTECTION_SUSPENDED, keep the full HRESULT and the first method that returned it because later cleanup calls can report a different state.
For FVE_E_DE_PROTECTION_SUSPENDED, capture manage-bde -status and the protector inventory for the exact volume GUID, not only the drive letter, because letters can change in WinRE, clusters and deployment environments.
Export BitLocker operational events for the FVE_E_DE_PROTECTION_SUSPENDED failure and note the boot session, caller identity and management source; that evidence separates this BitLocker condition from a generic access or storage error.

msinfo32.exe
powershell -NoProfile -Command "Get-BitLockerVolume | Format-Table MountPoint,VolumeType,VolumeStatus,ProtectionStatus"

Correct the configuration deliberately

For FVE_E_DE_PROTECTION_SUSPENDED, complete the maintenance reboot and re-enable protectors, then confirm protection is on rather than only encryption completed.
After correcting the FVE_E_DE_PROTECTION_SUSPENDED prerequisite, refresh protection, conversion and lock state before one controlled retry; a cached UI message is not proof that the FVE_E_DE_PROTECTION_SUSPENDED condition is still active.
Before a FVE_E_DE_PROTECTION_SUSPENDED remediation deletes protectors, changes firmware mode, resizes partitions or decrypts a production drive, verify that an independent recovery method is available and escrowed in the intended directory or account.

Treat FVE_E_DE_PROTECTION_SUSPENDED as a state label rather than a complete recovery plan. Confirm a successful retry with an updated BitLocker state query and a verified recovery path.

State checks specific to FVE_E_DE_PROTECTION_SUSPENDED

Checkpoint	How to interpret it for FVE_E_DE_PROTECTION_SUSPENDED
Before the call	Record the target identity and the pre-call automatic Device Encryption state. For FVE_E_DE_PROTECTION_SUSPENDED, the decisive boundary is that Device Encryption is configured but key protectors are temporarily disabled, often for a servicing or firmware transition.
At failure	Preserve GetProtectionStatus, reboot count for suspension, servicing history, protector list, conversion state and pending reboot state. This proves whether FVE_E_DE_PROTECTION_SUSPENDED came from BitLocker itself or from a wrapper translating another result.
After correction	Complete the maintenance reboot and re-enable protectors, then confirm protection is on rather than only encryption completed. The FVE_E_DE_PROTECTION_SUSPENDED request should then advance without removing an unrelated recovery route.
After reboot or remount	Recheck protection, conversion and lock state for FVE_E_DE_PROTECTION_SUSPENDED; a successful management call is incomplete if the next boot cannot unlock the volume.

Verification after the change

For FVE_E_DE_PROTECTION_SUSPENDED, success means more than the absence of a dialog. Confirm that the condition represented by FVE_E_DE_PROTECTION_SUSPENDED now matches the intended design, that the protector inventory has not lost an independent recovery route, and that the next reboot or remount can unlock the volume. If the FVE_E_DE_PROTECTION_SUSPENDED request advances to another HRESULT, record both values in order because that transition reveals the next unmet prerequisite.

References

Reference set for FVE_E_DE_PROTECTION_SUSPENDED:

Looking for a different code? Search another status or error code.