| Previous | Next |
| MILAVERR_INSUFFICIENTVIDEORESOURCES | MILAVERR_REQUESTEDTEXTURETOOBIG |
MILAVERR_VIDEOACCELERATIONNOTAVAILABLE
The scope of MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is WPF video acceleration and texture resources. The requested hardware-accelerated video path is unavailable. Keep 0x88980509 beside the returning method because a wrapper can replace this distinction with a generic subsystem message.
Keep neighboring failures separate
This status says the acceleration path cannot be used; it does not by itself say that software playback is impossible. For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, do not treat the constant name as a complete root-cause report; preserve the nested media, COM, graphics, or driver result before resetting the player.
What the status establishes
When MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is returned, accelerated media playback allocates decode surfaces, mixer intermediates, presentation textures, and compositor resources under device-specific dimension and format limits. “Out of resources,” “acceleration unavailable,” and “texture too large” describe different decisions in the MILAVERR_VIDEOACCELERATIONNOTAVAILABLE path. For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, capture requested dimensions and formats before falling back, because software playback may hide the original GPU contract.
For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, inspect the following boundary: capability negotiation among decoder, mixer, presenter, WPF rendering tier, and graphics driver.
Build a useful incident record
| Record | Why it matters here |
|---|---|
| Adapter and driver versions | For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, recording adapter and driver versions separates the WPF video acceleration and texture resources boundary from a later wrapper symptom. |
| Codec, profile, level, resolution, and pixel format | In MILAVERR_VIDEOACCELERATIONNOTAVAILABLE diagnostics, recording codec, profile, level, resolution, and pixel format ties the HRESULT to the WPF video acceleration and texture resources boundary rather than to the final visible failure. |
| WPF rendering tier and hardware-acceleration policy | Comparing WPF rendering tier and hardware-acceleration policy shows whether MILAVERR_VIDEOACCELERATIONNOTAVAILABLE follows input, object state, or environment. |
| Device-creation and video-service capability results | Preserving device-creation and video-service capability results provides the evidence needed to test this distinction: this status says the acceleration path cannot be used; it does not by itself say that software playback is impossible. |
Interpret the controls
| Test | Interpretation | Hold constant |
|---|---|---|
| Same environment, reduced input | If MILAVERR_VIDEOACCELERATIONNOTAVAILABLE disappears with a smaller faithful case, complexity within WPF video acceleration and texture resources is implicated. | For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, keep adapter and driver versions fixed while simplifying WPF rendering tier and hardware-acceleration policy. |
| Same input, fresh object generation | If MILAVERR_VIDEOACCELERATIONNOTAVAILABLE changes after rebuilding state, examine ownership across source reader, media-type negotiation, clock, decoder, mixer, presenter, and WPF visual. | For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, place codec, profile, level, resolution, and pixel format on the timeline of the last successful transition. |
| Same operation on a controlled second path | If MILAVERR_VIDEOACCELERATIONNOTAVAILABLE follows one environment, the failure is not explained by source data alone. | For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, compare process architecture, media stack version, rendering tier, adapter, and session state while preserving device-creation and video-service capability results. |
Reduce the scenario safely
For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, keep the source fixed and vary output dimensions, hardware acceleration, adapter, and rendering tier separately. When MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is returned, a successful low-resolution or software path narrows the resource boundary but does not prove the original accelerated configuration was valid.
- When MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is returned, test the same media through a software path.
- Use a baseline codec profile and moderate dimensions in the MILAVERR_VIDEOACCELERATIONNOTAVAILABLE path.
- For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, check remote-session and virtual-machine restrictions.
- When MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is returned, compare with a current signed graphics driver.
Prove the correction
A correction for MILAVERR_VIDEOACCELERATIONNOTAVAILABLE should let the operation at the WPF video acceleration and texture resources boundary complete repeatedly under the original supported conditions. Repeat the control that begins with “Test the same media through a software path” and confirm that the following lifecycle step also succeeds. For MILAVERR_VIDEOACCELERATIONNOTAVAILABLE, keep the original failing sample and one deliberate negative case so fallback cannot be mistaken for repair.
Technical references
When MILAVERR_VIDEOACCELERATIONNOTAVAILABLE is returned, these references define the public API family, object model, or error list used to interpret this status.
- Microsoft Open Specifications: HRESULT values.
- Microsoft: Multimedia overview for WPF.
- Microsoft: MediaElement class.
- Microsoft: MediaClock class.
- Microsoft: WPF graphics rendering tiers.
Looking for a different code? Search another status or error code.