| Previous | Next |
| NS_E_BAD_SYNTAX_IN_SERVER_RESPONSE | NS_E_TOO_MANY_HOPS |
NS_E_RESET_SOCKET_CONNECTION
NS_E_RESET_SOCKET_CONNECTION in a format, graph or streaming trace
For this HRESULT (0xC00D2F00) the decisive boundary is the peer reset the established streaming socket. Diagnose the failing streaming stage directly and avoid inferring the cause only from the visible playback symptom.
A Windows Media streaming request crosses name resolution, proxy selection, protocol negotiation, authentication, session creation and packet delivery before retrying. WMSP and related protocols maintain session state, so a valid TCP connection alone does not establish a usable media session in the diagnostic record. In the case of this result, preserve the earliest lower-level result because wrappers can map several different causes to the same HRESULT when isolating this failure.
Nearby results are not interchangeable
Main distinction: the code identifies one network or protocol checkpoint and should not be collapsed into a generic connectivity failure at this checkpoint.
| Nearby HRESULT | How to compare it |
|---|---|
NS_E_NO_EXISTING_PACKETIZER | the selected stream has no active packetizer plug-in |
NS_E_BAD_SYNTAX_IN_SERVER_RESPONSE | The response does not conform to the syntax expected by the streaming client |
NS_E_TOO_MANY_HOPS | Redirect or proxy traversal exceeded the allowed hop count |
Failure anatomy
that stage is reached when the peer reset the established streaming socket. The caller must not assume that the next filter, packet, session or metadata state exists after this result.
Use repeat the same media URL with one protocol and one endpoint while recording DNS, connect, response and session timing separately as the negative control when isolating this failure. A later HRESULT means this checkpoint was cleared and the new result belongs to a different stage at this checkpoint.
Protocol-preserving retest
- Log
0xC00D2F00, this result, the exact operation and the first failure time. - Preserve original URL, chosen protocol, proxy mode, resolved endpoints, connection and response timing, authentication state, session identifier and first socket or protocol result.
- Do not reuse a graph, session, reader or metadata object created before the relevant configuration or resource changed for this diagnosis.
- Perform one isolated test: repeat the same media URL with one protocol and one endpoint while recording DNS, connect, response and session timing separately before retrying.
- Repeat through the same API and protocol path; a different player or local-copy test is useful only as a comparison, not as proof that the reported boundary is fixed.
- Confirm the expected next state and retain any new HRESULT as a separate downstream result when isolating this failure.
Network and protocol evidence
| Capture | Why it matters |
|---|---|
| Owning call | Record the API method, object identity, thread or callback and timestamp for the failed operation. |
| Decisive values | Original URL, chosen protocol, proxy mode, resolved endpoints, connection and response timing, authentication state, session identifier and first socket or protocol result. |
| Object generation | Note when the reader, writer, graph, URL object, streaming session or metadata provider was created; stale state can reproduce this result after configuration has changed. |
| First nested result | Keep the earliest codec, COM, socket, DNS, parser or provider status before it; later UI messages are less specific. |
| Comparison case | Use one known-good resource that exercises the same streaming checkpoint while changing only the rejected precondition. |
Reading the next network state
| Retest result | Interpretation |
|---|---|
| The identical call still returns the code | The values governing the original request are unchanged, or the caller is still using an older object generation. |
| A fresh object succeeds | Lifetime or cached state contributed to it; correct object recreation instead of applying a machine-wide workaround when isolating this failure. |
| The call advances to another HRESULT | the recorded state was cleared. Diagnose the new code at its own format, graph, URL, network or metadata stage. |
| Only one resource fails | The evidence favors content, URL, publishing point, stream, attribute or object-specific state rather than a global outage. |
Misleading actions
- Treating every streaming HRESULT as generic packet loss without separating DNS, connect, response and session phases for this diagnosis.
- Do not erase the first occurrence by repeatedly retrying; callbacks and reconnects can replace the useful state with a later wrapper error before retrying.
- Do not publish credentials, protected-content material or complete private URLs in the diagnostic record. Record redacted identifiers, lengths, hashes and protocol fields needed to reproduce the original boundary.
Technical references
- Windows Media HTTP Streaming Protocol overview
- Receiving a WMSP response
- Windows Media proxy interaction
- Windows media streaming protocol relationships
- Microsoft HRESULT registry
Treat it as resolved only when the same API path crosses this checkpoint; success through a different player or cached copy is merely supporting evidence at this checkpoint.
Looking for a different code? Search another status or error code.