What does BSOD 385 (WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT) mean?

 
Could be also:
ConstantTypeOS
ERROR_FILE_SYSTEM_VIRTUALIZATION_INVALID_OPERATIONWin32 errorWindows
Previous Next
WVR_LIVEDUMP_REPLICATION_IOCONTEXT_TIMEOUT WVR_LIVEDUMP_RECOVERY_IOCONTEXT_TIMEOUT

WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

Windows Volume Replication state transition timeout for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT is bug check code 0x00000181. This WVR live dump indicates that a volume replication state transition did not finish within the expected interval. The important diagnostic question is which transition was active and what resource blocked it.

How to read it in a dump for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

  • Identify the replication state before and after the attempted transition.
  • Cluster role changes, recovery, resync, and network disconnects can block progress.
  • The state-machine frame and event log determine whether storage, service, or network caused the timeout.

What to check for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

  • Check Storage Replica and Failover Clustering logs around the transition.
  • Verify connectivity and storage latency between replication partners.
  • Compare whether the timeout follows planned failover, recovery, or service restart.

References for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

Dump evidence for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, preserve the complete dump, the four bug-check parameters, the exact Windows build, loaded-module list, and the event timeline immediately before the stop. AllStat summarizes the condition as “WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT”; that sentence identifies the failure class, while the parameters and stack determine which object, driver, processor, or subsystem instance was involved.

Analysis order for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

  • Run WinDbg !analyze -v, then inspect the documented meaning of each WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT parameter instead of relying only on the probably-caused-by line.
  • For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, find the earliest abnormal event: driver update, firmware change, device reset, storage error, verifier report, resource exhaustion, or application hang connected with wvr / livedump / state / transition / timeout.
  • For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, keep third-party filter, security, storage, graphics, and virtualization drivers in the module inventory; removing evidence before dump analysis can obscure the responsible path.

Do not repeatedly reboot a machine affected by WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT before collecting the dump and event logs. For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, recovery actions should follow the component identified by the stack and parameters, not merely the symbolic stop-code name.

Dump evidence for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, preserve the complete dump, the four bug-check parameters, the exact Windows build, loaded-module list, and the event timeline immediately before the stop. AllStat summarizes the condition as “WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT”; that sentence identifies the failure class, while the parameters and stack determine which object, driver, processor, or subsystem instance was involved.

Analysis order for WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT

  • Run WinDbg !analyze -v, then inspect the documented meaning of each WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT parameter instead of relying only on the probably-caused-by line.
  • For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, find the earliest abnormal event: driver update, firmware change, device reset, storage error, verifier report, resource exhaustion, or application hang connected with wvr / livedump / state / transition / timeout.
  • For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, keep third-party filter, security, storage, graphics, and virtualization drivers in the module inventory; removing evidence before dump analysis can obscure the responsible path.

Do not repeatedly reboot a machine affected by WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT before collecting the dump and event logs. For WVR_LIVEDUMP_STATE_TRANSITION_TIMEOUT, recovery actions should follow the component identified by the stack and parameters, not merely the symbolic stop-code name.

Looking for a different code? Search another status or error code.